Truck Freight:Ships in 3 to 5 days The Big Blue Air Pak is the complete package: a multiprocess welder, generator, air compressor, and optional battery charger. Deutz turbo-charged four-cylinder diesel engine provides ample power at high altitudes. Ingersoll-Rand ultra-reliable industrial rotary screw air compressor. Belt-driven with automatic belt tensioner with a life expectancy of 30,000 hours. Independent compressor controls include an on/off switch for applications not requiring compressed air. At idle speed, the Air Pak will produce 100 PSI at 60 CFM. Quiet - at only 70 db (95 Lwa) when idle, 79 db (104 Lwa) at maximum output. Improves work site communications. Hot Start provides positive stick electrode starts to make it easy to start all types of electrodes. Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. Optional AC/DC/battery charge/jump-start for AC TIG welding and 12 or 24 volt batteries. Simply select the battery voltage and connect cables to the separate battery output studs. Note: High-frequency control required for AC TIG welding. Meets NEMA and IEC output ratings. *Engine is a Turbocharged, 64 hp, Deutz,4-cylinder, diesel *COLD WEATHER PKG includes weld ammeter & voltmeter, battery lock-out / tag-out disconnect, intake manifold heater & oil pan heater for cold weather starting. *DELUXE PKG includes Cold Weather Pkg PLUS, vandalism lock-out with locking front panel & locking engine compartment door, 20 kW 3ph/12kW 1-ph Generator, AC TIG, Battery Jump-Start and Charger 12/24 Volt. ( * HF251 required for AC TIG) Features: *Power source included *Engine Gauges and Auto Idle Applications: *Industrial Applications: *Railroad Maintenance *Mining Maintenance *Maintenance and Repair Rigs Process: *AC* /DC Stick (SMAW) *MIG (GMAW) *Flux Cored (FCAW) *AC TIG (GTAW) * *DC TIG (DC GTAW) *Stud Welding *Air Carbon Arc (CAC-A) thru 1/2" carbons *Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models *Battery Charging/Jump-Starting* *Air Compressor * Deluxe Model Only Specifications: *Rated Output at 104 deg F: *Stick: 600 A, 44 V (26.4 kW), 40% duty cycle *MIG/FCAW: 500 A, 40 V (20 kW), 100 % duty cycle *Output Power Range: *CC/AC: 20 - 575 A* *CC/DC: 20 - 750 A *CV/DC: 14 - 40 V *Battery Charger 12/24 V, 50-750 A* *Air Compressor: 100 PSI, 60 CFM, 100 % duty cycle *(* Deluxe Model Only) *Generator Power- rated at 104 deg F: *5,500 watts Peak - 4,000 watts Continuous *20,000 watts 3-phase / 12,000 1-phase Continuous (* Deluxe Model Only) *Engine: Turbo-charged 64 hp Deutz Diesel *Dimensions: *H: 43 in *W: 28 1/2 in *D: 67 1/2 in *Net Weight: *Base & Cold Weather Models: 1,931 lbs *Deluxe Model: 1,956 lbs Warranty: *Welder/Generator/Air Compressor is warranted by Miller for 3 years, parts and labor *Engine is warranted by Deutz for 3 years Weight: 1931 lbs

Truck Freight:Ships in 3 to 5 days The Miller Du-Op is a dual-operator welding generator is two seperate high performance welding machines powered by one dependable engine. New! Deutz F3L914 EPA engine has 14% more horsepower. New automatic engine shutdown protects engine if low oil pressure or high coolant temperature occurs. Multiprocess capabilities performed independently at the same time - each operator has a choice of Stick, TIG or MIG. Paralleling switch parallels both outputs to a single side for double the amperage. This provides a safe and easy way to run larger electrodes, Stud weld or Air Carbon Arc gouge. Hot Start automatically provides additional amperage to start electrode. This produces positive starts and reduces chance of arc marking. Standard CV allows MIG and Flux Cored welding without hassle and expense of a CV module kit. Standard 14-pin receptacle allows for simple connection for remote controls and wire feeders. Single range allows full range of operation in all processes without walking back to switch ranges. Digital weld meters allow critical monitoring of weld output for each operator. Applications: *Manufacturing Industrial: *Pipe Welding *Structural Process: *Stick (SMAW) *MIG (GMAW) *Flux Cored (FCAW) *TIG (GTAW) *Air Carbon Arc (CAC-A) thru 3/8" carbons Specifications: *Rated Output at 104 deg F: *Single Weld Mode: 550 A at 30 V, 40% Duty Cycle *Dual Weld Mode: 275 A at 31 V, 40% Duty Cycle *Output Power Range: *Single Weld Mode CC-DC: 15 - 600 A *Dual Weld Mode CC-DC: 15 - 300 A *Single and Dual Weld Mode CC-DC: 10 - 32 V *Generator Power- rated at 104 deg F: 5,500 watts Peak - 4,000 watts Continuous *Engine: Deutz 48 HP at 1800 RPM (Diesel) *Dimensions: *H: 47 5/8 in *W: 31 1/4 in *D: 60 1/2 in *Net Weight: 2,115 lbs Warranty: *Welder/generator is warranted by Miller for 3 years, parts and labor *Engine is warranted by Deutz for 3 years Weight: 2115 lbs

Truck Freight:Ships in 3 to 5 days The Big Blue Turbo equals high altitude, high output multiprocess welder that provides a superior arc. New 600 amps at 100% duty cycle. Duetz turbo-charged four-cylinder diesel engine provides ample power at high altitudes . Quiet - at only 70 db (95 Lwa) when idle, 79 db (104 Lwa) at maximum output. Improves work site communications. Hot Start provides positive stick electrode starts to make it easy to start all types of electrodes. Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. Applications: *Manufacturing Industrial: *Construction *Mining *Railroad Process: *Stick (SMAW) *MIG (GMAW) *TIG (GTAW) *Flux Cored (FCAW) *Air Carbon Arc (CAC-A) thru 5/8" carbons *Stud Welding Specifications: *Rated Output at 104 deg F: *CC/DC: 600 A at 44 V, 100% Duty Cycle *CV/DC: 600 A at 36 V, 100% Duty Cycle *Output Power Range: *Stick/TIG: 20 - 750 A *MIG/FCAW: 14 - 40 V *Generator Power - rated at 104 deg F: 5,500 watts Peak - 4,000 watts Continuous *Engine: Deutz Turbo-charged 64 HP at 1800 RPM (Diesel) *Dimensions: *H: 43 in *W: 28 1/2 in *D: 67 1/2 in *Net Weight: 1,931 lbs Warranty: *Welder/generator is warranted by Miller for 3 years, parts and labor *Engine is warranted by Deutz for 3 years Weight: 1931 lbs

Truck Freight:Ships in 3 to 5 days Mobile diesels offer power for those big industrial jobs. Voltage selector switch offers "true" switchable 120/240V 1-& 3-phase operation. 120/208V 3-phase or 277/480V 3-phase power options. AC and engine meters, safety shutdowns, and a receptacle package on each unit. Generator Features: *Heavy duty Iveco/NEF45SM2 industrial diesel engine *Basler DGC2020 digital controller with digital readouts *Brushless alternator *Switchable 4-position voltage selector switch *Full receptacle package and shore power inlet *14-Gauge galvanneal steel sound attenuated enclosure *Durable power coat pain finish *Lockable side doors, front storage compartment and fuel access door *DOT approved trailer and tank Generator Specifications: *Three phase power rating: 65 kW/80 kva *Code F motor starting ability: 25 hp *Engine make/model: Iveco/NEF45SM2 *Axle type: Single *Axle capacity (lbs): 7000 *Shipping weight: 4,950 lbs Weight: 4950 lbs

Truck Freight:Ships in 3 to 5 days Mobile diesels offer power for those big industrial jobs. Voltage selector switch offers "true" switchable 120/240V 1-& 3-phase operation. 120/208V 3-phase or 277/480V 3-phase power options. AC and engine meters, safety shutdowns, and a receptacle package on each unit. Generator Features: *Heavy duty Iveco/NEF45AM1 industrial diesel engine *Basler DGC2020 digital controller with digital readouts *Brushless alternator *Switchable 4-position voltage selector switch *Full receptacle package and shore power inlet *14-Gauge galvanneal steel sound attenuated enclosure *Durable power coat pain finish *Lockable side doors, front storage compartment and fuel access door *DOT approved trailer and tank Generator Specifications: *Three phase power rating: 45 kW/56 kva *Code F motor starting ability: 20 hp *Engine make/model: Iveco/NEF45AM1 *Axle type: Single *Axle capacity (lbs): 7000 *Shipping weight: 4,760 lbs Weight: 4760 lbs

Truck Freight:Ships in 3 to 5 days The Big Blue 500 is designed for fleet owners because it is easy to maintain and always ready to weld. Engine gauges are standard on all models. Oil pressure and coolant temperature gauges provide visual engine vitals . Hot Start provides positive Stick electrode starts to make it easy to start all types of electrodes, and works great for bead tie-ins. Arc-Drive makes the welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. 5500-watt peak generator power that is independent of weld settings which means no interaction between tools and the welding arc. Automatic engine shutdown protects engine if low oil pressure or high coolant temperature occurs. *500PT = Perkins 404.22T turbo-charged engine *500D 2011 = Deutz F4L2011 engine *2011 CC/CV Deluxe = Includes Auto Idle, Weld Meters and increased Generator Power Applications: *Manufacturing Industrial: *Heavy Construction *Structural Steel Work *Maintenance and Repair Rigs *Mining *Process Plant Piping *Sheet Metal Process: *Stick (SMAW) *TIG (GTAW) *Air Carbon Arc (CAC-A) thru 3/8" carbons *Stud Welding *MIG (GMAW) * *Flux Cored (FCAW) * * With CC/CV Models Specifications: *Rated Output at 104 deg F: *500 A at 40 V (20 kW), 100% duty cycle *Output Power Range: *DC Stick: 65-600 A *MIG/FCAW: 14 -40 V (* CC/CV Models only) *Generator Power - rated at 104 deg F: *5,500watts Peak, 4000 watts Continuous *20,000 watts 3-phase/12,000 1-Phase * Deluxe model only *Engine: * Perkins: 47 HP at 1800 RPM *4 cylinder, industrial liquid-cooled * Deutz (F4L): 47 HP at 1800 RPM *4 cylinder, Turbo-charged, industrial, air/oil-cooled *Dimensions: *H: 43 in *W: 28 1/2 in *D: 64 7/16 in *Net Weight: *Deutz (F3L): 1785 lbs *Perkins: 1565 lbs *Deutz (F4L): 1695 lbs Warranty: *Welder/generator is warranted by Miller for 3 years, parts and labor *Engine is warranted separately by engine manufacturer Weight: 1565 lbs

Truck Freight:Ships in 3 to 5 days Mobile diesels offer power for those big industrial jobs. Voltage selector switch offers "true" switchable 120/240V 1-& 3-phase operation. 120/208V 3-phase or 277/480V 3-phase power options. AC and engine meters, safety shutdowns, and a receptacle package on each unit. Generator Features: *Heavy duty Isuzu/4LE1 industrial diesel engine *Basler DGC2020 digital controller with digital readouts *Brushless alternator *Switchable 4-position voltage selector switch *Full receptacle package and shore power inlet *14-Gauge galvanneal steel sound attenuated enclosure *Durable power coat pain finish *Lockable side doors, front storage compartment and fuel access door *DOT approved trailer and tank Generator Specifications: *Three phase power rating: 20 kW/25 kva *Code F motor starting ability: 10 hp *Engine make/model: Isuzu/4LE1 *Axle type: Single *Axle capacity (lbs): 3500 *Shipping weight: 2,820 lbs Weight: 2820 lbs

Truck Freight:Ships in 3 to 5 days The PipePro 304 is a quiet, compact, yet extremely powerful multiprocess diesel engine driven unit designed especially for the cross country pipeliner and mechanical contractor. Weld At Idle provides up to 5000 watts of weld power (225 A at 23 V, 170 A at 30 V) , and when more power is needed the machine automatically goes to high speed with no changes in the arc. Patented dual-power option operates on engine or 230 volt single- or three-phase electric input power which eliminates fuel cost, noise, engine wear and emissions. Exceptional multiprocess arc. Excellent (uphill/downhill) bead (root), hot pass, fill and cap control on Stick welding. DIG control changes soft arc to stiff forceful arc that prevents electrode sticking. Lift-Arc TIG for DC welding without use of a HF unit for x-ray quality starts. MIG arc runs in a variety of modes with excellent results using any wire or flux core in the field. Inductance control customizes puddle for maximum performance. Adaptive Hot Start for Stick automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. *Engine is a Kubota, 3-cylinder, liquid-cooled, diesel engine, 26 HP at 3750 RPM *Stainless Steel model ideal for corrosive locations. Also has 120-volt Block Heater for easy starts in cold weather. *Dual Power means it operates on engine or electrical input power. Applications: *Industrial Applications: *Process Plant Piping *Pipe Welding *Structural *Fabrication *Generator Power Process: *MIG (GMAW) *Pulsed MIG (GMAW-P) with optional Optima control *Flux Cored (FCAW) *DC Stick (DC SMAW) *DC TIG (DC GTAW) *Air Carbon Arc (CAC-A) Cutting and Gouging *Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models Specifications: *Rated Output at 104 deg F: 300 A at 32 V, 60% Duty Cycle *Output Power Range: *CC-DC: 5 - 400 A *CV-DC: 10 - 34 V *Generator Power- rated at 104 deg F: 12,000 Watts, 1- or 3- Phase *Engine: Kubota 26 HP at 3600/2500 RPM (Diesel) *Dimensions: *H: 30 in *W: 24 in *D: 59 1/2 in *Net Weight: 910 lbs Warranty: *Welder/generator is warranted for 3 years, parts and labor *Engine is warranted separately by the engine manufacturer Weight: 910 lbs

Truck Freight:Ships in 3 to 5 days The Big 40 is powered by CAT diesel engine with added power, features and improved noise reduction at both idle and weld speed. New industrial-grade, sealed marine ignition switch with starter interlock prevents the starter from engaging while the engine is running. Protects ring gear and starter from abuse. Quiet, only 65 db (90Lwa) at idle and 73.8 db (98.7 Lwa)at 23 ft and maximum output. Improves work site environment and communication. Hot Start provides positive Stick electrode starts to make it easy to start all types of electrodes, and works great for bead tie-ins. New engine gauges standard on all models. 5,500-watt peak AC power that is independent of weld settings which means no interaction between tools and the welding arc. Designed and built with reliable, heavy-duty industrial components to allow it to operate in remote locations without downtime. Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. Automatic engine shutdown protects engine if low oil pressure or high engine coolant temperature occurs. Deluxe model includes: AC TIG to weld aluminum, engine gauges, weld meters and 15 kW three-phase power while not welding. Note: High-frequency control required for AC TIG welding. CSA, IEC and NEMA compliant. *C = Caterpillar 3024 liquid-cooled, 4-cylinder, diesel engine, 33 HP at 1800 RPM *Deluxe includes 15,000 watt generator power, Weld Meters and AC/DC Polarity Switch. Caterpillar engine, 33 HP at 1800 RPM. Applications: *Manufacturing Industrial: *Petro/Chem Fabrication *Structural Steel Work *Maintenance and Repair Process: *Stick (SMAW) *TIG (GTAW) *Air Carbon Arc (CAC-A) thru 5/16" carbons *Stud Welding *MIG (GMAW) * *Flux Cored (FCAW) * *AC TIG (GTAW) (Deluxe Model Only)* * With CC/CV Models Specifications: *Rated Output at 104 deg F: *400 A at 36 V, 14.4 kW, 100% Duty Cycle *450 A at 38 V, 17.1 kW, 60% Duty Cycle *For AC TIG: 375 A at 25 V, 9.4 kW, 40% Duty Cycle (CC/CV model) *Output Power Range: *DC Stick: 55 - 500 A *DC TIG: 15 - 350 A *AC TIG: 15 - 375 A* *MIG/FCAW: 14 - 40 V* *(* CC/CV models only) *Generator Power- rated at 104 deg F: *5,500 Watts Peak - 4,000 Watts Continuous *Deluxe Model: 15,000 Watts 3-phase 12,000 Watts 1-phase Continuous *Engine: Caterpillar: 33 HP at 1800 RPM (Diesel) *Dimensions: *H: 43 in *W: 28 1/2 in *D: 64 7/16 in *Net Weight: 1545 lbs Warranty: *Engine is warranted 2 years by Caterpillar *Welder/generator is warranted by Miller for 3 years, parts and labor Weight: 1545 lbs

Truck Freight:Ships in 3 to 5 days The Big Blue 400 is designed for fleet owners, easy to maintain and always ready to weld. Prior Big Blue 302 owners now have a choice between the Big Blue 400 or the PRO 300. Engine gauges are now standard on all models. Oil pressure and coolant temperature gauges provide visual engine vitals. Cleaner running tier II engines; Deutz 2011 and Perkins 404 Series. Hot Start provides positive Stick electrode starts to make it easy to start all types of electrodes, and works great for bead tie-ins. Arc-Drive makes the welding easy. Automatically enhances Stick welding, especially on pipe, by focusing the arc and preventing the electrode from going out. 5500-watt peak generator power that is independent of weld settings which means no interaction between tools and the welding arc. Automatic engine shutdown protects engine if low oil pressure or high coolant temperature occurs. *400D = Duetz F3L2011 engine *400P = Perkins 404.22 engine *Deluxe = Includes Auto Idle, Weld Meters, and increased Generator Power Applications: *Manufacturing Industrial: *Heavy Construction *Structural Steel Work *Maintenance and Repair Rigs *Mining *Process Plant Piping *Sheet Metal Process: *Stick (SMAW) *TIG (GTAW) *Air Carbon Arc (CAC-A) thru 5/16" carbons *Stud Welding *MIG (GMAW) * *Flux Cored (FCAW) * * With CC/CV Models Specifications: *Rated Output at 104 deg F: 400 A at 36 V (14.4 kW), 100% duty cycle *Output Power Range: *DC Stick: 55 - 500 A *MIG/FCAW: 14 - 40 V (CC/CV models) *Generator Power - rated at 104 deg F: *5,500 Watts Peak, 4000 Continuous *15,000 Watts 3-phase/12,000 1-Phase(* Deluxe model only) *Engine: * Deutz: 35 HP at 1800 RPM *3 cylinder, industrial air/oil-cooled * Perkins: 33 HP at 1800 RPM *4 cylinder, industrial liquid-cooled *Dimensions: *H: 43 in *W: 28 1/2 in *D: 64 7/16 in *Net Weight: *Deutz: 1,655 lbs *Perkins: 1,545 lbs Warranty: *Welder/generator is warranted by Miller for 3 years, parts and labor *Engine is warranted separately by engine manufacturer Weight: 1545 lbs

Truck Freight:Ships within 24 to 72 hours For demanding jobs that call for high amperage capabilities, the SAE-400 offers 400 amps for DC stick welding and 3,000 watts of AC power. Designed especially for pipeliners and field welders, the SAE-400 is powered by a heavy duty Perkins industrial diesel engine, which offers low maintenance and long life for hassle-free operation. Add CV wire welding with the optional CV Adapter.Or for off-shore and other corrosive environments the SAE-400 Severe Duty (The "Silver Bullet") is the preferred choice with its great arc performance, design simplicity, reliability and ruggedness! Utilizing customer experience and input from job-site use, it is an upgraded version of the workhorse SAE-400 that you can count on! Features of SAE-400: *Rugged Construction - Withstands rough field handling, protecting internal parts *Dual Continuous Output Control - Select either a soft "buttering" arc or a snappy "digging" arc for fast, high-quality welding *High Duty Cycle Welding Output - 100% duty cycle at 400 amps for demanding applications. Also rated at 500 amps *Arc Gouging - Arc gouging with up to 3/8" (10mm) carbons *Heavy Duty Industrial Diesel Engine - Perkins 4-cylinder, water-cooled industrial diesel engine offers low maintenance and long life *Multiple Arcs - Large-capacity DC weld output makes the SAE-400 the No. 1 choice for multiple arcs with the Multi-Weld 350 system *ISO 9001 - Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards Features of SAE-400 Severe Duty: *Designed For The Off-Shore Salt Spray Environment *Stainless steel and hot-dip galvanized case and internal sheet metal parts *Stainless steel brushholder assemblies *All copper coils *Coated radiator, fuel tank, laminations and wire connections *Sealed switches *Rugged Construction- Built in a heavy gauge steel case designed for durability on the job site. Withstands rough field handling *Includes Features Per Mineral Management Services Code - Spark arrestor and engine air intake shutdown device are standard *Dual Continuous Control - Dual continuous control of both current and open circuit voltage lets operator select the precise arc characteristics needed for each job *High Duty Cycle Welding Output - 100% duty cycle at 400 amps for demanding applications. Also rated at 500 amps *Arc Gouging - Arc gouging with up to 3/8" (10 mm) carbons *Heavy-Duty Industrial Diesel Engine - Perkins 4-cylinder, water-cooled industrial diesel engine offers low maintenance and long life Processes: *SAE-400 *Stick *TIG * Flux-Cored (with CV Adapter) *Gouging *SAE-400 Severe Duty *Stick *Gouging Application: *The SAE-400 is for demanding jobs that call for high amperage capabilities, designed especially for pipeliners and field welders *The SAE-400 Severe Duty is for off-shore and other corrosive environments, it is an upgraded version of the workhorse SAE-400 Unit Includes *100 ft. (

Truck Freight:Ships in 3 to 5 days The Trailblazer Pro 350 D is designed for the professional welder who needs a machine with higher outputs and excellent arc performance for all types of welding jobs. Arc-Drive makes welding easy. Automatically enhances Stick welding, especially on pipe , by focusing the arc and preventing the electrode from going out. 12,000 watt voltage-regulated generator power allows tools, inverter welders or plasma cutters to run without affecting the arc while welding. Standard GFCI receptacles are required on most job sites to protect operators from electrical hazards. High welding outputs to dominate larger diameter flux cored wires for increased deposition and Air Carbon gouging thru 1/4 in carbons. 4-pole, 3-phase generator produces a smooth and stable welding arc in all processes: Stick, MIG, FCAW and AC and DC TIG. One of the most fuel-efficient diesel machines. at 150 amps, 40% duty cycle, fuel consumption is only .42 gal/hour while welding at idle speed. The same weld output at weld speed uses only .61 gal/hour. Fuel capability is 13 gal to provide long runtime before refueling. Toolless top and side access allows easy and faster maintenance with little clearance space needed. Toolless remote oil drain is standard. Applications: *Industrial Applications: *Mechanical Contractors *Rig Owners *Structural Steel Work *Process Plant Piping *Fabrication Process: *MIG (GMAW) *Flux Cored (FCAW) *AC/DC Stick (SMAW) *AC/DC TIG (GTAW) *Air Carbon Arc (CAC-A) thru 1/4" carbons *Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models Specifications: *Rated Output at 104 deg F: *CC/DC & CV/DC: 300 A AT 32 V, 100% Duty Cycle *350 A at 28 V, 60% Duty Cycle *CC/AC: 200A at 25 V, 60% Duty Cycle *Output Power Range: *CC-DC : 20 - 350 A *CV-DC : 10 - 34 V *CC-AC : 35 - 250 A *Generator Power- rated at 104 deg F: 12,000 watts Continuous *Engine: Kubota 26 HP, 3 cylinder (diesel) *Dimensions: *H: 34 1/4 in *W: 20 in *D: 52 in *Net Weight: 998 lbs Warranty: *Welder/generator is warranted for 3 years, parts and labor *Engine is warranted separately by the engine manufacturer Weight: 998 lbs